Tail Lamp Replacement Wagon

Removal Procedure

1. Open the rear lift gate.
2. Remove the fasteners from the side of the lamp assembly.
3. Gently pull the tail lamp housing straight back.
4. Disconnect the harness assembly from the tail lamp assembly.

Installation Procedure

1. Connect the harness assembly to the tail lamp assembly.
2. Align the tail lamp to the quarter panel and push gently forward until the tab fits into the quarter panel.

Notice

Refer to Fastener Notice in Cautions and Notices.

3. Tighten the fasteners.
Tighten

Tighten the tail lamp assembly (Sedan/Wagon) to 3.5 N·m (31 lb in).

4. Close the rear lift gate.