Sunroof Locator Blocks Replacement

Removal Procedure

1. Open the sunroof.
2. Remove the locator block fastening screws.
3. Remove the locator block using the needle-nose pliers.

Installation Procedure

1. Apply the Loctite 242® threadlocker, or equivalent, to the screws. Ensure that the last few threads are covered.
2. Install the locator blocks.

Notice

Refer to Fastener Notice in Cautions and Notices.

3. Install the locator block fastening screws.
Tighten

Tighten the sunroof locator blocks-to-sunroof module fasteners to 2 N·m (18 lb in).