Disengage the seat cushion by pushing rearward, then upward, at the 2 front
retaining locations to release the rear cushion from the retainers.
Slide the cushion assembly from under the seat back assembly, guiding
the seat belt buckles through the seat cushion. Remove the seat cushion assembly.
Position the seat cushion rear edge onto the rear compartment ramps. Route
the seat belt buckles through the rear cushion slots assuring that the buckles are
not twisted or stuck beneath the seat cushion.
Align the seat frame wire with the compartment lower retainers and push
rearward, while pushing downward, to secure the seat frame wire into the retainers.
Pull up on the cushion to verify that it is secure.
