Tail Lamp Replacement Sedan

Removal Procedure

1. Open the rear compartment lid.
2. Remove the fasteners from the side of the lamp.
3. Gently pull the tail lamp housing straight back.
4. Disconnect the harness assembly from the tail lamp assembly.

Installation Procedure

1. Connect the harness assembly to the tail lamp assembly.
2. Align the tail lamp to the quarter panel and push gently forward until the tab fits into the quarter panel.

Notice

Refer to Fastener Notice in Cautions and Notices.

3. Tighten the fasteners.
Tighten

Tighten the tail lamp assembly (Sedan/Wagon to 3.5 N·m (31 lb in).

4. Close the rear compartment lid.