Tail Lamp Replacement Coupe

Removal Procedure

1. Open the rear compartment lid.
2. Remove the fasteners from the side of the lamp assembly.
3. Pull the tail lamp housing straight back. Since the lamp snap fits into the quarter panel, pulling on the tail lamp will unseat it from the quarter panel.
4. Disconnect the harness assembly from the tail lamp assembly.

Installation Procedure

1. Connect the harness assembly to the tail lamp assembly.
2. Align the tail lamp to the quarter panel and push gently forward until the lamp snap fits into the quarter panel.
3. Tighten the fasteners.
Tighten

Tighten the tail lamp assembly (Coupe) to 2.5 N·m (22 lb in).

4. Close the rear compartment lid.