Table 1: | Parts Requirements: |
1996-2001 S-Series SC1, SL1, and SW1 Models
Some customers may comment about abnormal wear or a cut on inboard edge of the driver or passenger seat back cover.
Metal seat back frame is cutting through the seat back cover foam and may be wearing or cutting through seat back cover fabric.
Use following procedure to install seat back cushion pad fastener (P/N 21045354) on inboard edge of seat frame.
21045354 | Strip-P&D/Seat Bk Cush Pad Fstn |
* | Cover Asm-P/Seat Bk |
* | Cover Asm-D/Seat Bk |
*Refer to the S-Series Parts and Illustration Catalog for the appropriate model year and color seat back cover. |
To receive credit for this repair during the warranty coverage period, submit a claim through the Saturn Dealer System as follows:
Case Type | Description | Labor Operation Code | Timer |
---|---|---|---|
VW | Install Seat Cushion Pad Fastener Strip - Passenger Seat | Z4108 | 0.8 hrs |
VW | Install Seat Cushion Pad Fastener Strip - Driver Seat | Z4109 | 0.8 hrs |
GM bulletins are intended for use by professional technicians,
NOT a "do-it-yourselfer". They are written to inform these
technicians of conditions that may occur on some vehicles, or to
provide information that could assist in the proper service of a
vehicle. Properly trained technicians have the equipment,
tools, safety instructions, and know-how to do a job properly and
safely. If a condition is described, DO NOT assume that the
bulletin applies to your vehicle, or that your vehicle will have
that condition. See your GM dealer for information on whether
your vehicle may benefit from the information. |
![]() |
WE SUPPORT VOLUNTARY TECHNICIAN CERTIFICATION |
© Copyright General Motors Corporation. All Rights Reserved.