Water Deflector Replacement - Rear Door Coupe

Removal Procedure

Caution

If energy absorber is removed or damaged it must be replaced with a new part. If omitted, the vehicle will not meet federal motor vehicle safety standards (FMVSS), subjecting the retailer to possible civil penalties for making the vehicle inoperative to the FMVSS, and increasing the risk of injury to the vehicle occupants.

1. Remove the rear side door lower trim panel. Refer to Trim Panel Replacement - Side Rear Door .
2. Remove the rear side door water deflector.
• "No Wrinkle Zone" (1)
• Rear Side Door Water Deflector (2)

Installation Procedure

1. Position the water deflector to the top of the door structure.

Important

Make sure there are no wrinkles in the "No Wrinkle Zone" of the water deflector (shaded area in illustration).

2. Pull down on the water deflector and align the lower attachment clip hole.
3. Attach bottom edge and work any wrinkles upward.
4. Install the rear side door lower trim panel. Refer to Trim Panel Replacement - Side Rear Door .