Mirror Face Replacement Manual

Removal Procedure

1. Remove mirror face from the mirror by placing tape over mirror face, then breaking mirror face by striking carefully with a small hammer.
2. Remove all pieces of glass from mirror frame.
3. Mark location of 2-sided tape on mirror back plate.
4. Clean adhesive from mirror back plate.

Installation Procedure

1. Apply clear silicone adhesive into "bull's-eye" areas of mirror back plate. Cover each bull's-eye completely with a 1 mm (0.04 in.) thickness of 3M® Clear Silicone adhesive 08661 or equivalent.
2. Install mirror face to mirror frame by applying double-sided tape to marked areas of mirror back plate using double-sided 3M® Scotch Mount tape 06383 or equivalent.
3. Center mirror in mirror frame and press firmly to ensure adhesion of the mirror face to the mirror frame.