Manual Valve Link Replacement

Removal Procedure

1. Remove the valvebody. Refer to Control Valve Body Assembly Removal .

Notice

If manual shift shaft is rotated excessively, internal damage to the transaxle range switch may occur.

2. Remove the nut retaining the manual detent lever to the manual shift shaft.

Important

Place a clean rag in the transaxle case under the manual detent lever to catch the nut in case it is dropped.

3. Remove the manual detent lever from the manual shift shaft and disengage the park pawl lever from it.
4. Remove the manual detent lever and the manual valve link from the transaxle.

Installation Procedure

1. Install the manual valve link to the manual detent lever.

Notice

If manual shift shaft is rotated excessively, internal damage to the transaxle range switch may occur.

2. Prevent the manual shift shaft from rotating by holding control lever.

Notice

Refer to Fastener Notice in Cautions and Notices.

3. Install the attachment nut and torque.
Tighten

Tighten the manual detent lever-to-manual detent shaft nut to 12 N·m (9 lb ft).

4. Remove the rag from the transaxle case.




5. Install the valvebody. Refer to Control Valve Body Assembly Removal .