Document ID# 874834
1998 Saturn SL2/SC2/SW2
 

Wiper Arm Replacement - Rear

Removal Procedure

    Object Number: 867600  Size: SH
    Click here for detailed picture of above image.

    Notice

    Wagon rear wiper does not have a "Service Up" position. Lifting wiper too far away from glass can damage wiper system.

  1. Hold the arm away from the glass and using a small flat blade screwdriver, disengage the wiper arm retaining latch, leaving the arm resting on the latch.
  2. Remove the wiper arm from the wiper motor shaft, being careful to pull straight.
Installation Procedure

    Object Number: 867600  Size: SH
    Click here for detailed picture of above image.
  1. Install the wiper arm to the wiper motor shaft positioning the wiper arm just below the 1st rear defroster grid at the bottom of the lift gate glass.
  2. Push the retaining latch inward to secure the wiper arm to the wiper motor shaft.

  Document ID# 874834
1998 Saturn SL2/SC2/SW2