Fascia Replacement - Rear Bumper Wagon

Removal Procedure

1. Raise the liftgate.
2. Remove the plastic retainers from the rear bumper filler.
3. Remove the rear bumper filler. Refer to Bumper Filler Replacement .
4. Remove the plastic retainers, rear fascia bottom to fascia support brackets.
5. Remove the pushpins, wheelhouse liners to rear fascia.
6. Remove the fascia by sliding it rearward.
7. If replacing fascia, transfer the following items:
• Fascia brackets
• Rear bumper filler

Installation Procedure

1. Install the fascia over the bumper sub-assembly. Engage the fascia ends (key slots) over the shoulder bolts extending down from the quarter panel and pushing the fascia forward to lock the fascia to quarter panels.
2. Install the pushpins in wheelhouse liner to the fascia ends.
3. Install the plastic retainers, rear fascia bottom to the fascia support brackets.
4. Install rear bumper filler. Refer to Bumper Filler Replacement .
5. Align the bumper filler and install the plastic retainers.
6. Close the liftgate.