For tire pressure and maximum tire load rating specifications, refer to the tire loading information sticker located on the driver's door opening, below the door latch.
The metric unit for tire inflation pressure is the kilopascal (kPa), although inflation pressures are usually given in both kPa and psi. To convert between kPa and psi, use the following conversion formula:
1 psi = 6.9 kPa
Tire valve caps must always be installed onto the tire valve to keep dirt and
moisture out of valve.Important
Maintaining correct tire inflation pressure is essential to proper vehicle performance. The specified inflation pressure is carefully calculated to provide satisfactory ride, stability, precise steering, proper tire wear, and resistance to road damage.
Tire inflation pressure should be inspected when the tires are cold. Cold tires are defined as tires on a vehicle that have not been driven for at least 3 hours, or more than 1 mile.
As a vehicle is driven, the tires heat up. It is normal for tire inflation pressure to increase by at least 28 kPa (4 psi), when tires heat up. Therefore, on a vehicle with warm tires, never attempt to correct tire pressure by letting air out of the tire; wait until the tire cools down to check and adjust tire pressure. Letting air out of a warm tire reduces the cold inflation pressure.
Incorrect tire inflation pressure can lead to the following symptoms: