Weatherstrip Replacement - Rear Door 1st-Design Sedan/Wagon

Removal Procedure

1. Remove rear carpet retainer.
2. Noting position, slowly separate and remove weatherstrip from door opening starting at the seal joint at bottom of the door opening.

Installation Procedure

1. Clean old adhesive off of flange area.

Important

For proper sealing, rigid portion of bulb part of weatherstrip (approximately 191 mm [7 1/2 in.]) must be located at top front corner as shown in illustration.

2. Start seal over flange area in position noted above. Press weather strip over flange firmly to seat it.
3. Install rear carpet retainer.